Skoda

Kushaq

Onyx AT E20-compliant-engine debut configuration announced July 2024

E20 Ready
Your E20 answerE20 Ready
Model years covered2024–2025
Official documents7

Clear. Confirmed. Ready.

This Skoda Kushaq configuration is E20-ready.

The configuration and model years shown here are covered by the manufacturer or official documents available on this page.

Open official source

Exact configuration

What this answer covers

Model years
2024–2025
Variant
Onyx AT E20-compliant-engine debut configuration announced July 2024
Fuel
Petrol
Transmission
AT
Engine
1.0 TSI
Tank capacity
50 litres
Tyre pressure
Use the driver-side centre-pillar cold PSI
Published mileage
18.09 km/l on unspecified

Expected mileage

A practical E20 estimate for your car today.

FuelSaathi estimated mileage17.0 km/lUses a 6% planning adjustment for this odometer band. Update the first field with your car’s usual mileage for a personalised result.
Plan the next journeyUse this car’s figures with your current fuel price.

Owner essentials

Official owner guidance for this car.

Apply a transmission-specific item only to the gearbox named on the card. Tyre pressures must also match the fitted tyre size and load condition.

Tyre pressure

Use the driver-side centre-pillar cold PSI

Check with cold tyres every month and before a longer drive

Engine oil check

Keep the level within the marked range

Park level, warm the engine, switch it off, wait a few minutes, then check. Top up in 0.5 litre portions and never overfill

AT transmission care

Select P or R only while stationary

Applies to AT

Stop safely if the gearbox-overheat warning persists and let the gearbox cool

Mileage guidance

Build your own three-fill baseline

ARAI reports a 2–6% laboratory efficiency effect for validated E20 vehicles. Real-world results also depend on route, tyres, traffic, AC use and maintenance.

Official documents

Manufacturer manuals, brochures and statements

Information current

29 July 2026

Share an updated manufacturer document